MRX Shop

 

 

All enquiries can be directed via email here - 

 

MRX Anti-roll Bar Controls.

Dual or single units available. Laser cut from medium tensile steel, with 4140 Chromoly handles.  Use with 3/16" morse cables with 3" of travel.

 

$624.00+gst

MRX Anti-roll Bar Kits.

Everything you need to fabricate your own bar set up.  From speacially designed knife blade and billet alloy mounting blocks to weld on cable brackets.  We can supply what you need.

Prices will vary depending on kit specs.

 

$POA

Billet Alloy Reservoir 

150ml alloy reservoirs, billet o-ringed screw on cap, 1/8" pilot hole in the end which can be tapped for either AN or barb fittings. Designed to be used with remote reservoir pedal boxes.

 

$185.00+gst

Wheel Alignment Kit

Laser cut alloy string line units.  Fully adjustable to suit 99% of race and road vehicles.  Bolt together flat pack, comes with nylon and swivel clips.

 

$443.00+gst

Kit Set Uprights

MRX designed flat pack suspension upright.  Laser cut from high tensile steel, interlocked and TIG welded together.  This upright is deisgned to take the SKF X-Tracker sealed hub and drive flange unit.  

GT and Touring car geometry, 10 degrees built in caster, zero scrub.  Steering and brake caliper mounts are incorperated into the upright.  High tensile pins screw into the top and bottom of the upright for the upper and lower suspension arms.

 

$POA

Window Net Mounting Kit

Laser cut from 304 Stainless steel, this kit is designed to clamp to any exsisting roll cage.  No need to remove any paint, no welding involved.

Available in 1.50" and 1.75" sized clamps. Comes with threaded alloy rod, 5/16 rod end and latch with finger hook and all fastners.

 

$199.00+gst

Kit Set front Chassis Section

We have design this bolt together, bolt on front chassis section.  Using MRX designed suspension components and geometry, this laser cut and pressed chassis clip can be adapted to almost any OEM chassis/firewall. Welding on a fabricated bolting flange, this entire clip can be fitted using nothing but a socket set.

Damage a section....? Unbolt it and bolt in a new piece, with the modular design repairs can be done very easily and quickly. Contact us for more info.

 

$POA

MRX SpaceFrame Chassis'

Race proven, Kiwi deisgned and built race car chassis.  Chassis is a TIG welded EWS frame, with a meduim tensile and 4130 chromoly combination roll structure.  Laser cut brackets, air jack tubes, all suspension mounts, seat and pedal box mounts....everything is there.

Chassis' can be built as full TLX Touring car spec, or adjusted for GT racing.

Designed to take most medium to large sedans and coupe's.  Wheel base range; 2700mm - 2900mm (106" - 115").  

Full custom spec chassis' can be designed for larger or smaller vehicles.

 

$POA

Pit Trolley.

Light weight alloy construction.  Folding wheel rack,

Three storage bins, pneumatic wheels.

$775.00

Spare Wheel Mounting System

Kit set, adjustable spare wheel mounts to suit most wheel sizes and trailer set ups.  Can also be used in Targa/rally cars.

$285.00 each.

***MRX Flat Pack Vehicle Trailer***

 

MRX have a brand new product...
Our very own kit set trailers. Supplied in a full bolt together flat pack, to be put together by the purchaser. With all the top NZ components for a very competitive price.

Laser cut and folded from E90 Galvanized steel for maximum rigidity.
Two lengths available the long Deck measures in at 5340mm long and 2040mm inside and the smaller deck at 4100mm long.
High load 13" wheel and tyre package keep the trailer to a nice level, so when tilted to the 5 degree angle, using the 1.0m ramps, make loading that low race car nice and easy.

Dual leaf springs, Electric brakes, 1 7/8"coupling with parking brake latch, jockey wheel, lights and loom, safety chain and hand winch, as well as all hardware are all included in the package.

Rated to 3.5 ton gross.

$6,950.00 +GST (5.4m kit)

Get in touch if you require more info.